Graco InvisiPac HM25 Operation, Repair, And Parts page 56

Internal Models (HM25c)
Cables
Part Description
24X449 KIT, cable, M12, 4-pin,
F-L, 5 m
24X453 KIT, cable, M12, 4-pin,
F-L, 10 m
24X454 KIT, cable, M12, 8-pin,
F-L, 5 m
24X455 KIT, cable, M12,8-pin, F-L,
10 m
24X456 KIT, cable, M8, 3-pin, F-L,
5 m
24X457 KIT, cable, M8, 3-pin, F-L,
10 m
24X458 KIT, cable, M8, 4-pin, F-L,
5 m
24X459 KIT, cable, M8, 4-pin, F-L,
10 m
17F443 KIT, cordset, solenoid, 5 m Standard solenoid valve (i.e. GS-35)
17F444 KIT, cordset, solenoid, 10
m
24R710 KIT, cable, CAN, 5 m
24R711 KIT, cable, CAN 15 m
24R712 KIT, cable, CAN 50 m
128692 CABLE, NDSN encoder
Repair Parts
Part Description
17E019 KIT, pattern control board
24X521 KIT, internal pattern control
board
56
Use with
Triggers with M12 connection (12 mm nut)
Run-up controller
Encoder
Mini solenoid valve (i.e. GM-100)
Triggers with M8 connection (8 mm nut)
Remote mounting of pattern controller
enclosure or ADM
Connects Nordson encoder to the pattern
controller
Use with
Internal models (HM25c)
and external models
Internal models (HM25 and HM50)
Image
Image
334784G