Initial Startup; Software Update; Key Token - Graco InvisiPac HM25 Operation, Repair, And Parts

Initial Startup

Software Update

When integrating into an InvisiPac system, the system
may require a software update in order to be compatible
with the pattern controller. Follow Software Update
Procedure, page 49.
334784G

Key Token

For PC-8e models only, a key token is required to
enable encoder and run up use.
1. Remove token access panel on back of ADM.
2. Insert blue key token 24X626 and press firmly into
slot.
3. Replace cover, leaving key token inside.
Initial Startup
21