Stitching - Graco InvisiPac HM25 Operation, Repair, And Parts

Stitching

Stitching is used to reduce adhesive consumption while maintaining bond strength.
Definitions
Sub-Bead -
One dispense cycle of a stitched bead.
Stitch Interval -
The distance between the starts of the adjacent sub-beads.
Stitch Savings -
The percentage of adhesive saved.
Anchor Beads
An anchor bead is a sub-bead placed at the end of the stitched bead that guarantees the stitched bead ends at the
same location as the original (non-stitched) bead.
Setup
In order to stitch any bead, perform the following steps:
1. Navigate to Event Map, page 29.
2. Enter the desired stitch interval
savings for the desired gun.
NOTE: Stitching can be disabled by setting stitch
savings to "0".
334784G
3. Navigate to Pattern Definition, page 27.
4. Stitch individual beads be selecting the stitch bead
NOTE: Not all beads for a specific gun must be
and stitch stitched (some can be stitched while others are
solid).
option within each bead entry box.
Stitching
37