Write - Epson AcuLaser C8500 Service Manual

EPSON AcuLaser C8500

4.2.6.2 Write

Table 4-20. Count Accumulation Value - Write
Item Command
TONER CARTRIDGE Y [80 01 V1 V2 V3 V4]
TONER CARTRIDGE M [80 02 V1 V2 V3 V4]
TONER CARTRIDGE C [80 03 V1 V2 V3 V4]
TONER CARTRIDGE BK [80 04 V1 V2 V3 V4]
WASTE TONER BOX [80 11 V1 V2 V3 V4]
(Counter A)
WASTE TONER BOX [80 12 V1 V2 V3 V4]
(Counter B)
WASTE TONER BOX [80 13 V1 V2 V3 V4]
(Counter C)
MAIN FUSER ASSY [80 0C V1 V2 V3 V4]
2ND BTR ASSY [80 09 V1 V2 V3 V4]
BELT CLEANER ASSY [80 0A V1 V2 V3 V4]
DEVELOPER ASSY Y [80 0D V1 V2 V3 V4]
DEVELOPER ASSY M [80 0E V1 V2 V3 V4]
DEVELOPER ASSY C [80 0F V1 V2 V3 V4]
DEVELOPER ASSY BK [80 10 V1 V2 V3 V4]
Chapter 4 Diagnostics
Note
* When replacing with new
MAIN FUSER ASSY, do
counter clear.
* When replacing with new
2ND BTR ASSY, do counter
clear.
* When replacing with new
BELT CLEANER ASSY, do
counter clear.
* When replacing with new
DEVELOPER ASSY Y, do
counter clear.
* When replacing with new
DEVELOPER ASSY M, do
counter clear.
* When replacing with new
DEVELOPER ASSY C, do
counter clear.
* When replacing with new
DEVELOPER ASSY BK, do
counter clear.
Table 4-20. Count Accumulation Value - Write
Item Command
TRANSFER ASSY [80 14 V1 V2 V3 V4]
The whole of the device [80 05 V1 V2 V3 V4]
(Sheet count)
The whole of the device [80 07 V1 V2 V3 V4]
(Image count)
NOTE: As for the above [V1-V4], write the value which it read with
Section 4.2.6.1 "Read"
NOTE: of the former clause. When the reading value is bigger than Life
limit value (limit value), replace the parts to apply in principle,
write the value of [00 00 00 00](Life counter).
Revision C
Note
* When replacing with new
TRANSFER ASSY, do counter
clear.
4-69