Epson AcuLaser C8500 Service Manual page 319

EPSON AcuLaser C8500
[972(03CCh)] : The total dispense accumulation time of TONER
CARTRIDGE C.
[974(03CEh)] : The total dispense accumulation time of TONER
CARTRIDGE BK.
[976(03D0h)] : The total dispense accumulation time of TONER
CARTRIDGE Y.
[978(03D2h)] : The total dispense accumulation time of TONER
CARTRIDGE M.
[980(03D4h)] : The total dispense accumulation time of TONER
CARTRIDGE C.
NOTE: After periodic replacement of the MAIN FUSER ASSY and after
replacing the no-CRUM function specification DRUM
CARTRIDGE with a new one, write [0] to the following applicable
VNM number data below. (Setting a life counter value to "0" is
referred to as "Counter Clear".)
And as for each part of 2ND BTR ASSY, BELT CLEANER
ASSY, DEVELOPER ASSY Y, DEVELOPER ASSY M,
DEVELOPER ASSY C, DEVELOPER ASSY BK as well, after
periodic replacement of them with a new one, write [0] to the
following applicable VNM number data below.
When replacing MAIN FUSER ASSY with new one : [744(02E8h)]
When replacing TRANSFER ASSY with new one : [760(02F8h)]
When replacing 2ND BTR ASSY with new one : [768(0300h)]
When replacing BELT CLEANER ASSY with new one :
[748(02ECh)]
When replacing DEVELOPER ASSY Y with new one :
[730(02DAh)],[792(0318h)]
When replacing DEVELOPER ASSY M with new one :
[732(02DCh)],[796(031Ch)]
Chapter 4 Diagnostics
When replacing DEVELOPER ASSY C with new one :
[734(02DEh)],[800(0320h)]
When replacing DEVELOPER ASSY BK with new one :
[728(02D8h)],[788(0314h)]
NOTE: The partly same contents can be done by the Section 4.2.6
"Count Accumulation Value Read/Write"as well.
Revision C
4-51