Development - Epson AcuLaser C8500 Service Manual

EPSON AcuLaser C8500

3.3.2 Development

This adjustment must be performed when the DEVELOPER ASSY is replaced
or the impulse banding problem occurs.
Table 3-2. Occurrence Point of the Rear Edge Smear
Rear edge from the
Paper size
A3
A4 2UP (Second pieces)
Disassembly/Assembly/Adjustment
Reference:
paper (mm) EPL-C8000/C8200
27 mm 40 mm
50 mm 65 mm
CONFIRMATION PROCEDURE]
1. Remove the TOP COVER. (See Section 3.2.5.4.)
2. Remove the L/H INNER COVER. (See Section 3.2.5.5.)
3. Disconnect the DEVE. CONTACT PLATE ASSY (F187).
4. Remove the screw (silver, w/collar, 6mm) securing the DEVE. CONTACT
PLATE ASSY, and remove the DEVE. CONTACT PLATE ASSY.
Figure 3-131. Confirmation Procedure - 1
Adjustment
Revision C
3-113