Epson AcuLaser C8500 Service Manual page 339

EPSON AcuLaser C8500
Parameter Code Explanation
NOTE: Only a main parameter code is explained here. Refer to
[Interface spec.] for the parameter code which mention is not in,
and the detailed contents.
SHEET/ FSIZEU/ FSIZEL/ SSIZEU/ SSIZEL PARAMETER
Table 4-22. SHEET/ FSIZEU/ FSIZEL/ SSIZEU/ SSIZEL
PARAMETER
Parameter Code
SHEET Paper discharge number of sheets: 1Byte (Hex)
FSIZEU Laser beam scanning direction size: Most significant 1Byte
(Hex) [Set in 0.1mm units]
FSIZEL Laser beam scanning direction size: Least significant 1Byte
(Hex) [Set in 0.1mm units]
SSIZEU Paper feed direction size: Most significant 1Byte (Hex) [Set in
0.1mm units]
SSIZEL Paper feed direction size: Least significant 1Byte (Hex) [Set in
0.1mm units]
Chapter 4 Diagnostics
Parameter Code
INFO_T/INFO_D PARAMETER
NOTE: As for the following parameter, contents are prescribed in the Bit
unit.
Table 4-23. INFO_T/INFO_D PARAMETER
Data(Bit) INFO_T
7 -
6 -
5 -
4 -
3 -
2 MSI REGI. GUIDE (Down
Position)
1 OHP/LABEL TRAY (Use)
0 No Paper
Revision C
INFO_D
-
-
-
-
-
-
-
Full Stack
4-71