EPSON AcuLaser C8500
3.2.8.10 PITCH SENSOR (PL4.3.6) Removal
1. Draw out the MSI/REGI HIGH ASSY.
2. Remove the MSI FEED ASSY. (See Section 3.2.8.5.)
3. Remove 1 screw (gold, tapped, 8 mm) securing the PITCH SENSOR and
remove the PITCH SENSOR.
Figure 3-40. PITCH SENSOR Removal
Disassembly/Assembly/Adjustment
3.2.8.11 MSI FEED FRAME ASSY (PL4.3.20) Removal
1. Draw out the MSI/REGI HIGH ASSY.
2. Remove the MSI FEED ASSY. (See Section 3.2.8.5.)
3. Remove 3screw (gold, tapped, 8 mm) securing the MSI FEED FRAME
ASSY and remove the MSI FEED FRAME ASSY.
Disassembly/Assembly Procedures
Figure 3-41. MSI FEED FRAME ASSY Removal
Revision C
3-38