Ricoh Facsimile Operating Instructions Manual page 198

Administrator Setting
H H H H
Enter a Box name, and then press
[OK].
Reference
"Entering Text", General Set-
tings Guide
I I I I
Enter a SUB Code.
Note
❒ To change the SUB Code, press
[Clear] or the { { { { Clear/Stop} } } } key,
and then try again. To change
Box name, press [Box Name], and
then repeat from step
J J J J
Specify the condition of registra-
tion.
Programming End Receivers
A Select an End Receiver.
9
Note
❒ You can store five End Re-
ceivers.
B Specify End Receivers with
Quick Dials, and then press
[OK].
188
Programming a password
If you do not want to program a
password, proceed to step
A Press [Password].
H
.
B Enter a password, and then press
Note
❒ You can change the display
to the fax destination, Inter-
net fax destination, and IP-
Fax destination using the
button on the right side of the
display.
❒ A reception station can also
be registered as a group des-
tination. In such a case, a
maximum of 500 parties in-
cluding End Receivers 1-5
can be specified in a group.
To register another End Receiv-
ers, repeat the procedure from
step A.
[OK].
Note
❒ If you make a mistake, press
[Clear] or the { { { { Clear/Stop} } } } key
before pressing [OK], and
then try again.
K
.