Table of Contents
Advertisement
Simplifying the Operation
Using a Program
Note
❒ Using the program causes the pre-
vious settings to be cleared.
❒ If you have no programmed desti-
nations or scan settings as pro-
grams, select the program number,
and then enter the fax number of
the destination and select the scan
settings you require.
A A A A
Make sure that the machine is in
facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the { { { { Facsimile} } } }
key.
B B B B
Place the original.
C C C C
Press the { { { { Program} } } } key.
7
D D D D
Confirm that [Recall] is selected,
and press the registered program
No.
The standby display appears.
Then, the programmed fax num-
ber is shown. Transmission Mode
is selected.
132
E E E E
Press the { { { { Start} } } } key.
The fax number and specified time
are shown on the display, and the
machine starts to scan the original.
Transmission starts at the specified
time.
ZLFS310N
Advertisement
Table of Contents
