Programming A Polling Id; Programming A Memory Lock Id - Ricoh Facsimile Operating Instructions Manual

Administrator Setting

Programming a Polling ID

Program a Polling ID to use the
Transfer Request, Transfer Station,
Default ID Polling Transmission, and
Default ID Polling Reception func-
tions. When you use ID Transmission,
program the same ID as the one pro-
grammed on the sender's machine.
Reference
p.11 "Polling Transmission"
p.14 "Polling Reception"
p.52 "Transfer Request"
p.75 "Selecting transmission op-
tions for a single transmission"
A A A A
Press the { { { { User Tools/Counter} } } } key.
B B B B
Press [Facsimile Features].
C C C C
Press [Administrator Tools].
D D D D
Press [Program Polling ID].
9 E E E E
Enter an ID using the number keys
and [A] to [F], and then press [OK].
Note
❒ Register a four-digit number us-
ing 0 through 9 and A through F
(expect for 0000 and FFFF).
192
❒ If you make a mistake, press
[Clear] or the { { { { Clear/Stop} } } } key be-
fore pressing [OK], and then try
again.
❒ To cancel programming an ID,
press [Cancel]. The display re-
turns to that of step
F F F F
Press the { { { { User Tools/Counter} } } } key.
The standby display appears.

Programming a Memory Lock ID

Program a Memory Lock ID to be en-
tered before printing documents
when the Memory Lock function is
activated.
A A A A
Press the { { { { User Tools/Counter} } } } key.
B B B B
Press [Facsimile Features].
C C C C
Press [Administrator Tools].
D D D D
Press [Program Memory Lock ID].
E E E E
Enter an ID using the number keys,
and then press [OK].
Note
❒ A Memory Lock ID can be any
four-digit number, except 0000.
D
.