Programming The Ldap Server - Ricoh Aficio MP 161F Operating Instructions Manual

System Settings

Programming the LDAP Server

This section explains how to specify the LDAP server settings.
Entering an identification name
A
2 Select [Name] using {U} or {T}, and then press the {OK} key.
Register a name for the LDAP server to appear on the server selection screen
of the LDAP search operation.
B
Enter the name and then press the {OK} key.
Entering a server name
A
Select [Server Name] using {U} or {T}, and then press the {OK} key.
Register LDAP Server host name or IPv4 address.
B
Enter the server name, and then press the {OK} key.
64