J
Press [End].
K
Press the {OK} key.
L
Press the {User Tools/Counter} key.
Note
❒ To change the name, see "Changing a Name".
Reference
p.170 "Changing a fax number"
p.171 "Programming the SUB Code"
p.172 "Programming the SEP Code"
p.173 "Setting the International TX Mode"
p.174 "Setting label insertion"
p.142 "Changing a Registered Name"
Using a Fax Destination as a sender
Following describes the procedure for using a fax number as the sender (sending
number).
A
Press [Details].
B
Select [Auth. Protect] using {U} or {T}, and then press the {OK} key.
Fax Destination
7
169