Ricoh Aficio MP 161F Operating Instructions Manual page 90

Fax Features
❖ Gateway Settings
Register, change, or delete the gateway used for transmission to IP-Fax. Reg-
ister to use the gateway without using the gatekeeper/SIP server.
Program/Change:
Select [Fax Features] using {U} or {T}, and then press the {OK} key.
A
Select [IP-Fax Settings] using {U} or {T}, and then press the {OK} key.
B
Select [Gateway Settings] using {U} or {T}, and then press the {OK} key.
C
Select [Program/Change] using {U} or {T}, and then press the {OK} key.
D
Select [*Not Programmed] using {U} or {T}, and then press the {OK} key.
E
Enter the Prefix using the number key, and then press the {OK} key.
F
For documents sent using a gateway to G3 Fax, prefixes can be used. If the
first several digits of IP-Fax number and the gateway- specific prefix are
identical, documents can be transmitted using the registered digits of the
4
gateway. For example, if both 03 and 04 have been registered as gateway
number while 0312345678 is also specified, documents can be transmitted
via a gateway for which 03 is used as a prefix.
When you wish to use the gateways regardless of the IP-Fax destination
numbers, register only the gateway addresses without registering the pre-
fix.
Enter Gateway Address and then press the {OK} key.
G
Select [H.323] or [SIP] using {U} or {T}, and then press the {OK} key.
H
Delete:
Select [Fax Features] using {U} or {T}, and then press the {OK} key.
A
Select [IP-Fax Settings] using {U} or {T}, and then press the {OK} key.
B
Select [Gateway Settings] using {U} or {T}, and then press the {OK} key.
C
Select [Delete] using {U} or {T}, and then press the {OK} key.
D
Select the gateway you want to delete using {U} or {T}, and then press the
E
{OK} key.
F Press [Yes].
Reference
p.4 "Accessing User Tools"
p.96 "Parameter Settings List"
82