Reading And Clearing The Error Log; Overview Of Error Log Table - Omron C200H-ASC11 Manual

Reading and Clearing the Error Log

Example:
9-4

Reading and Clearing the Error Log

9-4-1

Overview of Error Log Table

ASCII Unit
Error log
table
Allocated I/O (n + 7)
Allocated I/O (n + 5)
Allocated I/O (n)
254
Bit address
C200H/HS C200HX/HG/HE
AR 0109 SR 28109
--- SR 28110
--- SR 28111
--- SR 28112
--- SR 28113
--- SR 28114
--- SR 28115
Note *Of the C200HX/HG/HE CPU Units, used only in the C200HX/HG-CPU5
(Z)E C200HX/HG-CPU6
Program memory in the ASCII Unit may be destroyed if the ASCII Unit is
restarted while it is executing startup processing after the power supply is
turned ON. Program restarts so that they will not occur during startup pro-
cessing.
User-defined restart bit
The ASCII Unit has an error log table which contains up to of 30 errors. When
an error occurs, the error code and type are stored in the Error Log Table.
Error type/code
Error type/code
Error type/code
Error type/code
Error type
CS1
A50209 Restarts Unit 9.
A50210 Restarts Unit A (10).*
A50211 Restarts Unit B (11).*
A50212 Restarts Unit C (12).*
A50213 Restarts Unit D (13).*
A50214 Restarts Unit E (14).*
A50215 Restarts Unit F (15).*
- (Z)E.
@
BASIC RUN Flag
Word n+5, bit 07
Newest
Up to 30
Error code
When an error is generated, the newest
error type/code is recorded on the Error
Log Table.
New/old error flag
By toggling this bit back and forward between 1 and 0,
the previous error type/code is displayed on the Error
Log Table in n + 7.
Function
When toggling word n bit 06,
the previous error type/code
is called.
Section 9-4
-
@
Special I/O
Unit Restart
Bit