Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
Suspensions
•
Using a dial gauge, check that the ra-
dial (A) and the axial (B) eccentricities
of the rim do not exceed the limit value.
An excessive eccentricity is usually
caused by worn or damaged bearings.
Replace the rim if, after replacing the
bearings, the value is not within the
specified limit.
Characteristic
Maximum radial and axial eccentricity:
2 mm (0.0079 in)
Handlebar
pos.
Description
1
TCEI screw fastening counterweight
to handlebar end
2
Stainless steel TCC screw fastening
upper clamp to lower clamp
3
Screws fastening light switch assem-
bly
Front fork
SUSP - 274
email: info@motomatrix.co.uk
DORSODURO FACTORY ABS
H
ANDLEBAR
Type
Quantity
M6x50
2
10 Nm (7.37 lbf ft)
M8x25
4
25 Nm (18.44 lbf ft)
-
2 + 2
1.5 Nm (1.11 lbf ft)
Torque
Notes
-
-
-