APRILIA DORSODURO FACTORY ABS 2011 Service Station Manual page 288

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
Suspensions
pos. Description
1 Headstock ring nut - pre-tightening
1 Headstock ring nut - tightening
2 Headstock cap
3 Stainless steel TCC screw fastening
stanchions to upper and lower yokes
4 TCEI screw fastening lower clamp
onto fork yoke
OPTION 02- Steering upper plate with a headstock cut.
pos. Description
1 Headstock ring nut - pre-tightening
1 Headstock ring nut - tightening
2 Headstock nut - pre-tightening
2 Headstock nut
3 Stainless steel TCC screw fastening
stanchions to upper and lower yokes
4 TCEI screw fastening lower clamp
onto fork yoke
Adjusting play
•
Place the vehicle so that the front wheel is off the ground.
•
Carry out a handlebar rotation test, using a dynamometer at the handgrip external end.
•
The handlebar resistance to rotation must be of 400 ± 150 g (0.88 ± 0.33 lb) in both directions.
•
Adjust if clearance is detected.
OPTION 01- Steering upper plate without a headstock cut.
•
Unscrew and remove the U-bolt four
fixing screws.
•
Remove the U-bolt.
•
Remove the handlebar and place it
paying attention that oil in the clutch
and front brake tanks does not spill out.
SUSP - 288
email: info@motomatrix.co.uk
DORSODURO FACTORY ABS
S - O 1
TEERING PTION
Type Quantity
M25x1 1
M25x1 1
M22x1 1
M8x30 6
M10x60 2
S - O 2
TEERING PTION
Type Quantity
M25x1 1
M25x1 1
M22x1 1
M22x1 1
M8x30 6
M10x60 2
Torque Notes
30 Nm (22.13 lbf ft) Steering package
settlement
12 Nm (8.85 lbf ft)
100 Nm (73.75 lbf ft)
25 Nm (18.44 lbf ft)
50 Nm (36.88 lbf ft)
Torque Notes
30 Nm (22.13 lbf ft) Steering package
settlement
12 Nm (8.85 lbf ft)
10 Nm (7.37 lbf ft) Loctite 243
25 Nm (18.44 lbf ft) Loctite 243
25 Nm (18.44 lbf ft)
50 Nm (36.88 lbf ft)
-
-
-
-
-
-
-