APRILIA DORSODURO FACTORY ABS 2011 Service Station Manual page 245

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
DORSODURO FACTORY ABS
LUBRICATION CHECK
•
Working on both crankcase halves, re-
move and thoroughly clean the nozzle
that lubricates the piston crown.
REPLACE THE SPRAY NOZZLE O-RING IF NECESSARY.
•
Replace the O-ring on the oil passage
duct.
Before refitting
UPON REFITTING THE CRANKSHAFT, GREASE THE SHAFT BUSHING-CONNECTING ROD
COUPLING.
Inspecting the crankshaft components
Crankshaft axial clearance check
•
The shaft axial clearance on the crank-
case should be checked with a com-
parator mounted on the specific com-
parator support.
•
The clearance should be between 0.1
- 0.4 mm (0.0039 - 0.0157 in).
•
If the clearance is beyond tolerance,
check the reference surfaces.
Specific tooling
020714Y Dial gauge mounting
Removal
•
Mark the position of the original semi-bushings on the crankcase.
email: info@motomatrix.co.uk
Engine
ENG - 245