APRILIA DORSODURO FACTORY ABS 2011 Service Station Manual page 339

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
DORSODURO FACTORY ABS
•
Tighten the three screws.
•
Fit the upper part of the tool.
•
Fully tighten the pin with the bolt.
•
Preventing the bolt from turning, tight-
en the nut to that the lower part of the
tool, onto which the shaft and integra-
ted seal are connected, raises.
•
Remove the oil seal.
Installing
REFITTING
•
Insert a new oil seal using the appro-
priate tool to a depth of 2 mm (0.079 in)
(determined by the tool), relative to the
upper part of the crankcase, at the end
of the flanged part of the seat orifice.
CAUTION
AFTER INSTALLING THE OIL SEAL, CHECK THAT THE
WATER DRAINAGE HOLE UNDER THE OIL SEAL ITSELF
IS NOT OBSTRUCTED.
Specific tooling
020885Y Water pump oil seal punch
email: info@motomatrix.co.uk
Cooling system
COOL SYS - 339