Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
DORSODURO FACTORY ABS
pos.
7
Nut fastening Stud Bolts / Head
8
Bleed union fastener screw
9
Water bleed union (steel)
10
Water bleed union (brass)
Removing the overhead camshaft
•
Remove the clutch side crankcase
half.
•
Rotate the crankshaft until the rear cyl-
inder reaches the TDC.
First remove the rear head cover in order to re-
move the rear head camshafts.
First remove the front head cover in order to re-
move the front head camshafts.
Mark the head camshafts, the corresponding
sprocket wheels and cam caps in order not to in-
terchange them upon refitting.
•
Undo and remove the eight cam cap
screws working in a diagonal se-
quence and in stages.
•
Remove the cam cap carefully so as
not to go through it and damage the
seats of the calibrated dowels.
•
Remove the camshafts with the gears.
email: info@motomatrix.co.uk
Description
Type
Quantity
M8
2
26 Nm (19.18 lbf ft)
M5
4
6.5 Nm (4.79 lbf ft)
-
1
3.50 Nm (2.58 lbf ft)
-
2
2 Nm (1.48 lbf ft)
Engine
Torque
Notes
-
-
Loctite 243
Loctite 243
ENG - 209