APRILIA DORSODURO FACTORY ABS 2011 Service Station Manual page 188

Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys.
Engine
pos. Description
1 Gear retainer pawl fastener screw
2 Selector plate fastener screw
3 Screw fastening Desmodromic se-
lector drum / Selector sprocket
4 Gear sensor fastener screw
5 Selector pin fastener onto clutch side
crankcase half
6 Tightening tone wheel on secondary
gearbox
Removing the gear selector
To remove the gear selector refer to the operations described under Crankcase opening.
Checking the gear selector
Selector spring
Make sure that the spring ends on the two shifting
positions (forward = downshifting and backward =
up-shifting) are always in contact with the selector
plate
Make sure that the clearance between the end of
the spring on the selector plate and the stop pin is
almost null, when in home position (see diagrams)
Pawl
Make sure that both pawl tips run free, without
jamming
Selector plate spring
With a thickness gauge, check that the spring is
not deformed by over-stretching.
ENG - 188
email: info@motomatrix.co.uk
DORSODURO FACTORY ABS
G
EAR SELECTOR
Type Quantity
M6 1 12 Nm (8.85 lbf ft)
M5 3 5.50 Nm (4.06 lbf ft)
M8 1 23 Nm (16.96 lbf ft)
M5 2 5.50 Nm (4.06 lbf ft)
M10x1.5 1 16 Nm (11.80 lbf ft)
M16x1 1 43 Nm (31.72 lbf ft)
Torque Notes
-
-
-
Loctite 243
-
Loctite 270