Synchronization - Siemens SIMATIC ET 200S Operating Instructions Manual

1Count24V/100kHz
2.6 Count Modes
2.6.8

Synchronization

Requirement
In order to use this function, you must first select it with the "Synchronize on Positive Edge"
Function DI parameter.
Description
Figure 2-11 Once-Only and Periodic Synchronization
If you have assigned synchronization, the rising edge of a reference signal on the input sets
the 1Count24V/100kHz to the load value.
You can select between once-only and periodic synchronization ("Synchronization"
parameter).
36
Technological Functions
Operating Instructions, 02/2007, A5E00124867-05