Siemens SIMATIC ET 200S Operating Instructions Manual page 73

Function of the Digital Output DO1
For the "Function DO1" parameter, select one of the following functions for the digital output:
• Output (no switching by the limit-value monitoring)
• Measured value outside the limits
• Measured value under the low limit
• Measured value over the high limit
Values that Can Be Changed During Operation
• Low limit (LOAD_PREPARE)
• High limit (LOAD_VAL)
• Function of the Digital Output DO1 (C_DOPARAM)
• Integration time/update time (C_INTTIME)
See also
Gate Functions in Measurement Modes (Page 74)
Behavior of the Output in Measurement Modes (Page 75)
Assignment of the Feedback and Control Interfaces for the Measurement Modes (Page 77)
Technological Functions
Operating Instructions, 02/2007, A5E00124867-05
1Count24V/100kHz
2.7 Measurement Modes
73