Assigning The Parameters For Cycle Synchronization On The Profibus Dp - Siemens SIMATIC IM151-1 Manual

Functions
3.1 Cycle synchronization
3.1.2

Assigning the parameters for cycle Synchronization on the PROFIBUS DP

Procedure
1. CPU settings:
22
"Object properties" of the CPU > Register "Cycle synchronization alarms"
– CPU - Set cycle synchronization alarm
– Select the DP master system being used
– Select the desired sub-process image
Figure 3-1 Dialog box cycle synchronization alarms
IM151-1 HIGH FEATURE interface module (6ES7151-1BA02-0AB0)
Manual, 03/2008, A5E01075975-02