Field
Domain Name
Username
Password
Adding Active Directory Users
After configuring FaxFinder to use LDAP authentication, add the Active Directory users who log into FaxFinder to
send faxes.
Note:
User details and fax options for Active Directory users are read-only in FaxFinder. To change these users'
details and fax options, make the changes in Active Directory and then sync FaxFinder.
1.
Go to Users > Active Directory Users.
2.
Click Add.
3.
Enter an Active Directory Folder name to the AD Group Name field. Folder name must match the Active
Directory group name. This field is case sensitive.
4.
Click Save.
Wait until FaxFinder adds Active Directory Users to the users list. When FaxFinder completes this
function, Active Directory users become available in the Active Directory Users list.
Note:
If an error message appears, the Active Directory Server is not configured correctly, cannot be
accessed, or the group name was entered incorrectly.
Syncing FaxFinder with Active Directory
Sync the Active Directory user database with FaxFinder to ensure FaxFinder has all current Active Directory users.
To do this:
1.
Go to Users > Active Directory Users.
2.
Click Sync.
FaxFinder indicates when synchronization is complete.
Deleting Active Directory Users
To delete Active Directory users:
1.
Go to Users > Active Directory Users.
2.
Click Delete.
3.
Confirm the deletion.
A message indicates when the deletion is completed. The Active Directory user list is emptied.
®
FaxFinder
Fax Server FF240-IP, FF240, FF440, FF840 Administrator Guide
Description
Enter the complete Active Directory server domain name, for example myserver.mts.com.
Enter an Active Directory username that has read access to Active Directory.
Enter the password associated with the username used to authenticate to the Active
Directory.
USING ACTIVE DIRECTORY WITH FAXFINDER
67