Server Certificate Parameters; Adding Users Individually; User Fields - Multitech FaxFinder FF440 Administrator's Manual

Chapter 3 – Basic FaxFinder Configuration
2. Enter certificate information. Refer to Server Certificate Parameters, below, for details. The values you
enter are for identification purposes only.
3. Click Generate. You will be prompted to reboot FaxFinder.
4. Reboot FaxFinder.

Server Certificate Parameters

Unless otherwise specified in the table below, you can enter up to 64 characters in these fields.
Field
Common Name Enter the hostname or IP address, depending on which you use to connect to FaxFinder.
The web browser uses this field to check for a valid certificate.
Days Enter up to three digits for number of days that the certificate is valid.
Country Enter the two letter code for the country the certificate is valid for. US is the code for the
United States. To find other country codes, go to
name codes."
State/Province Enter the state or province for which the certificate is valid.
Locality/City Enter the city or locality for which the certificate is valid.
Organization Enter the organization name for which the certificate is valid.
Email Address Enter the email address of the person responsible for the FaxFinder. Typically this is the
administrator. This field may be left blank.

Adding Users Individually

Users are those who will send faxes through FaxFinder. Multi-Tech recommends adding users into FaxFinder
before installing the FaxFinder Fax Client software on a user's workstation.
To add users individually:
1. Click Users to create user accounts.
2. Click the Add link.
3. Enter user information.
4. Click Update to save the entry. Refer to User Fields below for details.
5. Repeat Steps 2-4 for each user you want to add.
If you have several users to add, you can import a Comma Separated Value (CSV) file with user information.
Refer to Importing Users
Note: The Admin user cannot be deleted. To change the password or other Admin account information,
click Edit for the Admin.

User Fields

Field
Username
Full Name
Password
Confirm Password
Email
24
for details.
Enter a user name. This is used to login to a FaxFinder.
Enter the user's full name. FaxFinder uses this name as the fax sender's name.
Enter an alphanumeric password. Passwords cannot contain special characters and
are case-sensitive.
Re-enter the password to confirm it.
Enter the user's email address.
Description
www.iso.org
Description
FaxFinder x40 Administrator Guide
and search for "country