Creating A Restore File - Multitech FaxFinder FF240-IP Administrator's Manual

Destination
Share
Sftp
Print
Trash

Creating a Restore File

After you configure FaxFinder to work in your environment, create a restore point to save your settings. A restore
file allows you to restore your configuration settings if the FaxFinder is reset to factory defaults or if you make a
change you want to undo. To create a restore point:
1. Click System Configuration > Save/Restore.
2. Click Save Config. A file download window opens.
Note: Some browsers automatically save the file to a default location when you click Save Config. To save
to another location so you can find it, right-click Save Config and click Save as.
3. Click Save or OK depending on your browser.
The configuration restore file name is formatted as config_model_version_date.bin. For details on restoring a
configuration file, refer to
®
FaxFinder Fax Server FF240-IP, FF240, FF440, FF840 Administrator Guide
Required Additional Information
Click Browse and select a network folder. Add
network folders through the Shares page. See
Adding a Network Share
Select the SFTP server.
Select a printer.
None.
Note: If you select Trash, you cannot
define other destinations.
Restoring Configuration.
(Optional).
BASIC FAXFINDER CONFIGURATION
Destination Type
Global, LineDefault, Recipient
Global, LineDefault, Recipient
Global, LineDefault, Recipient
Line, Recipient
25