Install/Replace Msam Cards - VeriFone Omni 5 series Installation Manual

T S
ERMINAL ETUP

Install/Replace MSAM Cards

Install/Replace
MSAM Cards
CAUTION
To change or install
MSAMs
18
O 5 I
MNI XXX NSTALLATION
Figure 8 Closing Paper Roll Cover
8
Tear the paper off against the serrated metal strip in the printer.
For paper ordering information, refer to
When you first receive your Omni 5xxx terminal, you may need to install one or
more MSAM cards or you may need to replace old cards.
Observe standard precautions for handling electrostatically sensitive devices.
Electrostatic discharges can damage this equipment. VeriFone recommends using
a grounded anti-static wrist strap.
1
Remove the power cord and/or battery (see
the terminal.
2
Place the terminal upside down on a soft, clean surface to protect the lens
from scratches.
3
Remove the MSAM compartment door screw and rotate the door up and back
to access the MSAM cardholders (see
MSAM COMPARTMENT
DOOR SCREW
Figure 9 Opening MSAM Compartment Door
G
UIDE
Accessories and Documentation.
Smart Battery) from the bottom of
Figure 9).
MSAM COMPARTMENT
DOOR