Connection Ports - VeriFone Omni 5 series Installation Manual

T S
ERMINAL ETUP
Examine Terminal Features
NOTE

Connection Ports

14
O 5 I
MNI XXX NSTALLATION
•
An internal thermal printer.
•
The smart battery pack installed in back of unit.
•
A smart card reader, built into the front of the terminal. The icon
shown at right indicates proper card position and insertion
direction.
•
A SAM (security access module) compartment, built into the bottom of the
terminal. The Omni 5xxx terminal contains MSAM cardholders to support
multiple stored-value card programs or other merchant card requirements.
VeriFone ships variants of the Omni 5xxx terminal for different markets. Your
terminal may have a different configuration. The following devices may or may not
be present: a smart card reader, or zero or three MSAM cardholders. However, the
basic processes described in this guide remain the same, regardless of terminal
configuration.
Turn the terminal upside down to view the connection ports. Notice that the ports
are recessed. Different ports are provided to connect the Omni 5xxx to a
communications line, optional peripheral devices, and the power supply (see
Figure 3).
Figure 3 Connection Ports (Bottom View)
•
The communications port can be identified by an telephone shaped
icon, shown at right. Use this port to connect the Omni 5xxx to a
phone line.
•
Two RJ45-type modular jacks (serial ports) are available for attaching optional
peripheral devices.
G
UIDE