Smart Card Transaction - VeriFone Omni 5 series Installation Manual

T S
ERMINAL ETUP
Wireless Transactions
NOTE
NOTE
Wireless
Transactions
Smart Card
Transaction
To Conduct a Smart
Card Transaction
26
O 5 I
MNI XXX NSTALLATION
2
Remove the SIM card access door
Figure 18 Slide Off SIM Card Access Door
3
Open the SIM card holder and slide the SIM card supplied by your provider
into the cardholder
Do not lose the SIM card dust cover or retaining screw.
Figure 19 Insert SIM Card into Cardholder
The SIM cardholder has a notch on one corner to ensure the SIM card is
positioned correctly. The SIM card has a notch on one corner for easy orientation
in the cardholder. Before inserting the SIM card, position it as shown in
with the card's gold contacts facing down.
4
Replace the SIM card access door and screw.
To conduct a wireless transaction:
•
Ensure the terminal is in an optimal position for transmitting.
•
Follow the on-screen instructions provided with your application.
The smart card transaction procedure may vary from one application to an
another. Verify the procedure with your application provider before you perform a

smart card transaction.

1
Position a smart card with the contacts facing upward (see
2
Insert it into the smart card reader slot in a smooth, continuous motion until it
seats firmly.
G
UIDE
(Figure
(Figure 19).
18):
Figure 20).
Figure 19,