Installing Or Replacing Msam Cards - VeriFone Carbon 8 Installation Manual

S
ETUP

Installing or Replacing MSAM Cards

NOTE
Installing or
Replacing MSAM
Cards
CAUTION
NOTE
To install or replace
MSAMs
22
C 8 I
ARBON NSTALLATION
9
Align printer module with the base of the Carbon 8 base and slide them
together (see Figure
For paper ordering information, refer to
When you first receive your Carbon 8, you may need to install one or more MSAM
cards, or you may need to replace old cards.
Observe standard precautions when handling electrostatically sensitive devices.
Electrostatic discharges can damage this equipment. Verifone recommends
using a grounded anti-static wrist strap.
Verifone ships variants of the Carbon 8 device for different markets. Your unit
may have different features described in this section.
1
Power down the Carbon 8 unit.
2
Place the unit upside down on a soft, clean surface to protect the display from
scratches.
3
Hook your finger on the latch and lift the cover to access the MSAM card slot
(see Figure 11).
Figure 11 Opening the MSAM Cover
4
Remove any previously installed MSAM cards from the cardholder.
G
UIDE
10).
Accessories and Documentation.