Printer Test; Install/Replace Msam Cards - VeriFone Omni 3600 Installation Manual

O 3600 T
MNI ERMINAL

Install/Replace MSAM Cards

NOTE

Printer Test

Install/Replace
MSAM Cards
CAUTION
16
O 3600 I
MNI NSTALLATION
Figure 8 Close the Printer Cover
To prevent damage to the print roller on the paper roll cover, always close the
cover by gently pressing down on the paper roll cover tab.
To ensure the printer is operating correctly:
1
Turn on the terminal by pressing the green enter key (see
2
Enter system mode by pressing F2+F4 at the initial copyright screen, and
entering the system mode password (see Passwords).
3
Toggle through the
reach
•••••••••••••••
4
Press F4 to enter the
5
Press F3, , to start the printer self-test.
••••
The test printout, with printer information and repeating character strings, is
approximately 38 cm (15 in.) long.
When you first receive your Omni 3600 terminal, you may need to install a
merchant smart card or one or more micromodule-sized security account
manager (MSAM) cards, or you may need to replace old cards. Often, these small
cards arrive on a larger, credit card-style plastic card, from which they must be
removed. The following procedure describes MSAM card installation.
Observe standard precautions for handling electrostatically sensitive devices.
Electrostatic discharges can damage this equipment. An anti-static wrist strap
grounded to a metal surface is recommended.
1
Remove the battery (see
2
Open the MSAM door located beneath the battery
a
Push down and back on the raised arrow on the door.
b
Lift up on the raised arrow with the tip of your index finger.
G
UIDE
screens, using the down arrow key until you
•••••••••••••
.
screen.
••••••••••
Smart Battery)
Figure 2, page 10).
(Figure 9):