VeriFone Omni 5 series Installation Manual page 17

3
Loosen the glued leading edge of the paper or remove the protective strip
from the new roll of paper, unwind the paper roll past any glue residue.
Figure 6
4
Hold the roll so the paper feeds from the bottom of the roll (see
5
Drop the paper roll into the printer tray.
Figure 7
6
Pull paper up past glue residue from printer tray.
7
Close the paper roll cover by gently pressing directly on the cover until it clicks
shut, allowing a small amount of paper past the glue residue to extend outside
the printer door. (see
CAUTION
To prevent the paper roll cover from damaging the print roller, always gently press
down on the printer dust cover to close it.
Removing Partial Paper Roll
Loading Paper Roll
Figure 8).
T
ERMINAL
Install Paper Roll
Figure 7).
O 5 I G
MNI XXX NSTALLATION UIDE
S
ETUP
17