Connect Check Reader - VeriFone Omni 5 series Installation Manual

Figure 12
Connect Check The Omni 5xxx terminal supports the CR 600 and CR 1000i check readers.
Reader
Contact your VeriFone representative or visit the online store at
www.store.verifone.com
an example of a peripheral connection to the RS-232 port.
CAUTION
Check readers require a separate power source. Before connecting a check
reader or similar device, remove the power cord from the bottom of the terminal
and ensure that the green indicator LED is not lit.
Figure 13
Figure 12 provides an example of a smart card reader and PIN pad
connection to the PIN pad serial port.
PIN PAD
CONNECTION
Example PIN Pad Serial Port Connections
CR 600 Check Reader Connection
for information on these devices.
T
ERMINAL
Connect Optional Device(s)
SMART CARD
READER CONNECTION
Figure 13 provides
O 5 I G
MNI XXX NSTALLATION UIDE
S
ETUP
21