Install Paper Roll - VeriFone Omni 5 series Installation Manual

T S
ERMINAL ETUP

Install Paper Roll

Install Paper
Roll
CAUTION
To Install a Paper
Roll
16
O 5 I
MNI XXX NSTALLATION
A fast, quiet thermal printer is built in to the Omni 5xxx terminal.
Before you can process transactions that require a receipt or record, you must
install a roll of thermal-sensitive paper in the printer.
The ITP uses a roll of single-ply, thermal-sensitive paper 57 millimeters (2.24
inches) wide and 25 meters (82 feet) long. A pink out-of-paper indicator line
appears on the edge of the paper approximately 18 inches before the end of the
roll. After this line appears, there is enough paper remaining on the roll to
conclude at least one transaction.
Poor-quality paper can jam printer and create excessive paper dust. To order
high-quality VeriFone paper, refer to
Store thermal paper in a dry, dark area. Handle thermal paper carefully: impact,
friction, temperature, humidity, and oils affect the color and storage characteristics
of the paper.
Never load a roll of paper with folds, wrinkles, tears, or holes at the edges or in the
print area.
1
Press down on the button located on the side of the terminal to unlatch the
paper roll cover, then lift the cover up and back (see
Figure 5 Opening the Printer Cover
2
Remove any partial roll of paper in the printer tray by lifting up (see
G
UIDE
Accessories and Documentation.
Figure 5).
Figure 6).