Establish Telephone Line Connections - VeriFone Omni 5 series Installation Manual

WARNING
Establish
Telephone Line
Connections
WARNING
•
The RS-232 port, icon shown at right, connects a VeriFone
CR 600 check reader, 1000i check reader, or other peripheral
device.
•
The PIN pad port, icon shown at right, connects a external PIN
pad or smart card reader.
•
The power connection port uses a round barrel connector. It is
identified by the electrical power icon shown at right. Use this port to
connect the Omni 5xxx to the power pack to recharge the battery
through the unit.
Do not connect the terminal to the power supply until all the peripherals are
attached.
Connect the telephone cord to the communication port on the terminal, then route
it directly to a telephone wall jack (see
the line is dedicated to the terminal.
Figure 4 Direct Telephone Connection
To reduce the risk of fire, use only No. 26AWG or larger telecommunication line
cord.

Establish Telephone Line Connections

Figure 4). This is a direct connection, and
O 5
MNI XXX
T S
ERMINAL ETUP
15
I G
NSTALLATION UIDE