Install/Replace Msam Cards - VeriFone omni 5 series Installation Manual

7
CAUTION
Figure 10
8
Install/Replace
When you first receive your V
MSAM Cards
more MSAM cards or you may need to replace old cards.
CAUTION
1
To Install/Replace
MSAMs
2
Close the paper roll cover by gently pressing directly on the cover until it clicks
shut, allowing a small amount of paper past the glue residue to extend outside
the printer door. (see
To prevent the paper roll cover from damaging the print roller, always gently press
down on the printer dust cover to close it.
Closing Paper Roll Cover
Tear the paper off against the serrated metal strip in the printer.
For paper ordering information, refer to
Observe standard precautions when handling electrostatically sensitive devices.
Electrostatic discharges can damage this equipment. VeriFone recommends
using a grounded anti-static wrist strap.
Remove the power cord and/or battery (see
Place the terminal upside down on a soft, clean surface to protect the lens
from scratches.
Figure 10).
Accessories and
x x
5xx/V 6xx terminal, you may need to install one or
Smart
T
ERMINAL

Install/Replace MSAM Cards

Documentation.
Battery) from the terminal.
X X
V 5 /V 6 I G
XX XX NSTALLATION
S
ETUP
19
UIDE