Table of Contents
Advertisement
S
ETUP
MSAM/uSD Cards
WARNING
MSAM/uSD
Cards
CAUTION
Installing or
Changing MSAM/
uSD Card
NOTE
NOTE
P200/P200 P
I
14
LUS
NSTALLATION
Remove the clear protective film from the display.
3
Replace all the packing materials, close the lid, and save the carton for
4
repacking or moving the P200 unit in the future.
Do not use a unit that has been tampered with or otherwise damaged. This unit
comes equipped with tamper-evident label. If a label or component appears
damaged, immediately notify the shipping company and your Verifone
representative or service provider.
You may need to install a uSD card or one or more multiple security access
module (MSAM) cards or replace the old cards.
Figure 3
MSAM/uSD Slots
Observe standard precautions in handling electrostatically sensitive devices.
Electrostatic discharges can damage the equipment. Verifone recommends using
a grounded anti-static wrist strap.
To install or change uSD or MSAM card:
Place the terminal face down on a soft and clean surface to protect the lens
1
from scratches.
Slide out and lift the compartment cover. The uSD and MSAM cardholders are
2
now accessible.
The P200 supports two MSAM cards in a stacked configuration. P200 Plus
features a uSD connector.
Install the uSD or MSAM card by carefully sliding it into the slot until fully
3
inserted.
Insert the card with the card's gold contacts facing away from you, toward the unit.
G
UIDE
Hide quick links:
Advertisement
Table of Contents
