Snmp Trap Configuration - Planet Networking & Communication GS-5220-24P4X User Manual

4.3.3 SNMP Trap Configuration

Configure SNMP trap on this page. The SNMP Trap Configuration screen in
The page includes the following fields:
Object
•
Trap Config
•
Trap Mode
•
Trap Version
Figure 4-3-2: SNMP Trap Configuration Page Screenshot
Description
Indicates which trap Configuration's name for configuring. The allowed string
length is 0 to 255, and the allowed content is ASCII characters from 33 to 126.
Indicates the SNMP trap mode operation. Possible modes are:

Enabled: Enable SNMP trap mode operation.

Disabled: Disable SNMP trap mode operation.
Indicates the SNMP trap supported version. Possible versions are:
101
User's Manual of GS-5220 Ultra PoE & PoE+ Series
Figure 4-3-2 appears.