Port Limit Control - Planet Networking & Communication GS-5220-24P4X User Manual

4.12 Security
This section is to control the access of the Managed Switch, includes the user access and management control.
The Security page contains links to the following main topics:


Port Limit Control


Access Management

HTTPs / SSH

DHCP Snooping

IP Source Guard

ARP Inspection
4.12.1 Port Limit Control
This page allows you to configure the Port Security Limit Control system and port settings. Limit Control allows for limiting the
number of users on a given port. A user is identified by a MAC address and VLAN ID. If Limit Control is enabled on a port, the
limit specifies the maximum number of users on the port. If this number is exceeded, an action is taken. The action can be one
of the four different actions as described below.
The Limit Control module utilizes a lower-layer module and Port Security module, which manage MAC addresses learnt on the
port. The Limit Control configuration consists of two sections, a system- and a port-wide. The Port Limit Control Configuration
screen in Figure 4-12-1 appears.
User's Manual of GS-5220 Ultra PoE & PoE+ Series
282