Snmp Trap Configuration - Planet Networking & Communication IGS-5225-8T2S2X User Manual

4.2.2.3 SNMP Trap Configuration

Configure SNMP trap on this page. The SNMP Trap Configuration screen in
The page includes the following fields:
Object
•
Trap Config
•
Trap Mode
•
Trap Version
Figure 4-2-2-3: SNMP Trap Configuration Page Screenshot
Description
Indicates which trap Configuration's name for configuring. The allowed string
length is 0 to 255, and the allowed content is ASCII characters from 33 to 126.
Indicates the SNMP trap mode operation. Possible modes are:

Enabled: Enable SNMP trap mode operation.

Disabled: Disable SNMP trap mode operation.
Indicates the SNMP trap supported version. Possible versions are:

SNMP v1: Set SNMP trap supported version 1.
User's Manual of IGS-5225-8T2S2X & 8P2S2X series
Figure 4-2-2-3
88
appears.