Table of Contents
Advertisement
2.
The SNMP Communities screen is displayed as in Figure 3-41.
The page includes the following fields:
• SNMP Management Station -- A list of management station IP addresses.
• Community String -- Functions as a password and used to authenticate the selected management station to
the device.
• Access Mode -- Defines the access rights of the community. The possible field values are:
• Read Only -- The management access is restricted to read-only, for all MIBs except the community table, for
which there is no access.
• Read Write -- The management access is read-write, for all MIBs except the community table, for which there is
no access.
• SNMP Admin -- The management access is read-write for all MIBs, including the community table.
• Remove -- Removes a community, when selected.
SNMP Trap
From the SNMP Trap Settings page, the user can enable or disable the device to send SNMP traps or notifications.
To open SNMP Trap screen perform the folling:
1.
Click System -> SNMP -> Trap
2.
The SNMP Trap screen is displayed as in Figure 3-42.
Figure 3-41 SNMP Communities screen
45
Advertisement
Table of Contents
