Measurement Features - Agilent Technologies MSO6012A User Manual

6000 Series Oscilloscope User's Guide

Measurement features

Automatic measurements
Voltage (scope channels only)
Time
Counter
Threshold definition
Cursors
Waveform math
FFT
Points
Source of FFT
Window
Noise floor
Amplitude
Frequency resolution
Maximum frequency
Characteristics and Specifications
Measurements are continuously updated.
Cursors track last selected measurement.
Peak-to-peak, maximum, minimum, average,
amplitude, top, base, overshoot, preshoot, RMS,
standard deviation (AC RMS)
Frequency, period, + width, -width and duty cycle
on any channels
Rise time, fall time, X at max Y (time at max volts),
X at min Y (time at min volts), delay, and phase on
scope channels only
Built-in 5-digit frequency counter on any scope
channel. Counts up to the scope's bandwidth (1
GHz max). The counter resolution can be
increased to 8 digits with an external 10 MHz
reference.
Variable by percent and absolute value; 10%,
50%, 90% default for time measurements
Manually or automatically placed readout of
horizontal (X, DX, 1/DX) and vertical (Y, DY)
Additionally logic or scope channels can be
displayed as binary or hex values
One function of 1-2, 1x2, FFT, differentiate,
integrate.
Source of FFT, differentiate, integrate: scope
channels 1 or 2, 1-2, 1+2, 1x2
Fixed at 1000 points
Scope channels 1, 2, 3 or 4, 1+2, 1-2, 1x2
Rectangular, flattop, Hanning
-50 to -90 dB depending on averaging
Display in dBV, dBm at 50 Ω
0.05/(time per div)
50/(time per div)
9
359