Agilent Technologies MSO6012A User Manual page 290

N O T E
6000 Series Oscilloscope User's Guide
When the FlexRay mode is selected, you can use the Settings
softkey to access the BUSDOCTOR Menu for changing the
BUSDOCTOR 2 control/operating modes.
Changing the BUSDOCTOR settings in the Serial Decode Menu also
changes them in the FlexRay Trigger Menu.
4 If the decode line does not appear on the display, press the
Decode softkey to turn it on. BUSDOCTOR must be connected
and running in asynchronous or synchronous mode for a
meaningful display.
5 If the oscilloscope is stopped, press the Run/Stop key to
acquire and decode data.
You can use the Delayed horizontal sweep mode for easier
navigation of the decoded data.
Displaying Data 6
289