Agilent Technologies MSO6012A User Manual page 29

1 Getting Started
Step 3
28
If needed
1 Loosely attach the Front Extender Supports to the Rear
Extender Supports with four (4) clip-nuts and four (4) of the
10-32 x 0.375 Rail Screws. (The screws require a Torx T20
driver.) Choose the correct set of slots in the supports such
that their overall length is approximately correct for the
depth of your cabinet.
Step 2
6000 Series Oscilloscope User's Guide
Step 4
If needed
Step 1,
step 5