Agilent Technologies MSO6012A User Manual page 112

6000 Series Oscilloscope User's Guide
the oscilloscope. Snap the wide end of the cable guide in
place, being careful not to pinch the cable.
4 Connect the ground lead on each set of channels (each pod),
using a probe grabber. The ground lead improves signal
fidelity to the oscilloscope, ensuring accurate measurements.
Channel
Pod Ground
5 Connect a grabber to one of the probe leads. (Other probe
leads are omitted from the figure for clarity.)
Viewing and Measuring Digital Signals
Circuit
Ground
3
Grabber
111