Auto Position Reply Function; Introducing New Functions; Voice Tx Function; Speech Function - Icom ID-51A Basic Instructions

NEW!

Auto Position Reply function

When you receive a call addressed to your own call sign, but
are in a situation that makes it difficult to operate the trans-
ceiver, this function automatically replies with your own call
sign and transmits your position.
• See the PDF type Advanced Instruction's Section 9 for details.
w Your position is auto-
matically transmitted.
q A call addressed to
your own call sign.
Your station

voice TX function

NEW!
You can transmit recorded audio once or repeatedly, which is
useful for D-STAR events.
• See the PDF type Advanced Instruction's Section 17 for details.
This is JA3YUA
JA3YUA
NOTE: This function requires a microSD card.
Destination
e After receiving, the
(ID-51)
screen shows the
position.
Repeat Voice TX
waiting screen

INTRODUCING NEW FUNCTIONS

NEW!

Speech function

Hold down [SPCH] for 1 second to audibly announce the
displayed frequency and operating mode, or call sign.
You will know it without looking at the display.
• See the PDF type Advanced Instruction's Section 17 for details.
Also, other functions help you know
the current setting without looking
at the display.
See the PDF type Advanced In-
struction for details.
❍ Home CH beep function
❍ [DIAL] speech function
❍ Mode speech function

Temporary Skip function

NEW!
This function temporarily skips unwanted frequencies during
a scan, for a set period.
• See the PDF type Advanced Instruction's Section 13 for details.
<While scanning>
Unwanted frequency Temporary Skip setting
13
13
48