I Sounds Set Mode Items - Icom IC-91A Instruction Manual

11
MENU SCREEN OPERATION

I Sounds set mode items

D D Beep output level
Adjusts the key-touch beep tone level to the desired level
within 39 levels.
Minimum level (no audio)
The key-touch beep
have a beep tone.
D D Key-touch beep
Turns the key-touch beep ON or OFF.
r
D D Scan stop beep
Turns the scan stop beep function ON or OFF.
r
102
Maximum level
must be set to ON to
(following item)
(default: ON)
r
(default: OFF)
r
D D Scope audio output
Select the audio output function capability during sweep with
band scope function.
• ON : The received audio sounds during sweep.
• OFF : No audio sounds during sweep.
r
D D Volume select
Select the volume level adjustment from Both and Separate
for dualwatch operation.
• BOTH : Both A band and B band volume level is ad-
justed with [VOL] at the same time.
• SEPARATE : The Volume setting is adjusted indepen-
dently in A and B bands with [VOL].
r
D D Standby Beep
Available for IC-91AD, or if the UT-121 is installed in the IC-91A.
Turns the beep emission capability ON and OFF when the com-
municating station finishes transmitting or the receive signal dis-
appears while in the digital mode operation.
r
(default)
r
(default)
r
(default: ON)
r