The Character Set Of The Fixed Cycle 225 Engraving Was - HEIDENHAIN TNC 620 User Manual

Fundamentals | New and changed cycle functions of software 81760x-02
New and changed cycle functions of software
81760x-02
New Load Adaptive Control (LAC) cycle for the load-dependent
adaptation of control parameters (software option 143), see
"ASCERTAIN THE LOAD (Cycle 239, DIN/ISO: G239, software
option 143)", Page 328
Cycle 270: CONTOUR TRAIN DATA was added to the cycle
package (software option 19), see "CONTOUR TRAIN DATA
(Cycle 270, DIN/ISO: G270, software option 19)", Page 238
Cycle 39 CYLINDER SURFACE (software option 1) Contour was
added to the cycle package, see "CYLINDER SURFACE (Cycle
39, DIN/ISO: G139, software option 1)", Page 263

The character set of the fixed cycle 225 Engraving was

expanded by the CE, ß and @ characters and the system time,
see "ENGRAVING (Cycle 225, DIN/ISO: G225)", Page 317
Cycles 252 to 254 (software option 19)were expanded by the
optional parameter Q439, see "Cycle parameters", Page 160
Cycle 22 (software option 19) was expanded by the optional
parameters Q401 and Q404, see "ROUGHING (Cycle 22, DIN/
ISO: G122, software option 19)", Page 220
Cycle 484 (software option 17) was expanded by the optional
parameter Q536, see "Calibrating the wireless TT 449 (Cycle
484, DIN/ISO: G484, Option 17)", Page 530
HEIDENHAIN | TNC 620 | User's manual for cycle programming | 10/2017
13