HEIDENHAIN TNC 620 User Manual page 511

Touch Probe Cycles: Automatic Kinematics Measurement | PRESET COMPENSATION (Cycle 452, DIN/
ISO: G452, option)
Parameter Meaning
number
Q141 Standard deviation measured in the A axis
(–1 if axis was not measured)
Q142 Standard deviation measured in the B axis
(–1 if axis was not measured)
Q143 Standard deviation measured in the C axis
(–1 if axis was not measured)
Q144 Optimized standard deviation in the A axis
(–1 if axis was not measured)
Q145 Optimized standard deviation in the B axis
(–1 if axis was not measured)
Q146 Optimized standard deviation in the C axis
(–1 if axis was not measured)
Q147 Offset error in X direction, for manual trans-
fer to the corresponding machine parameter
Q148 Offset error in Y direction, for manual trans-
fer to the corresponding machine parameter
Q149 Offset error in Z direction, for manual trans-
fer to the corresponding machine parameter
HEIDENHAIN | TNC 620 | User's manual for cycle programming | 10/2017
17
511